Web Shop

nyloflex® eco ACT 170 D

Lifting proven quality to a sustainable future

Main specifications

  • Base materialPolyester film
  • Color of raw platelight blue with black LAMS layer
  • Total thickness (mm) (inch)1.70 (0.067")
  • Hardness acc. to DIN 5350550
  • Plate hardness (Shore A)63
All specifications

Main specifications

  • Base materialPolyester film
  • Color of raw platelight blue with black LAMS layer
  • Total thickness (mm) (inch)1.70 (0.067")
  • Hardness acc. to DIN 5350550
  • Plate hardness (Shore A)63
All specifications

nyloflex® eco ACT 170 D Overview

Solvent Plate
Round Top Dot
Paper
GD2
Film
Aluminium
Solvent Based Ink
Water Based Ink
UV Ink
Digital
  • Sustainable medium hard photopolymer flexo plate for the perfect combination of halftones & solids
  • Suitable for tube & LED exposure
  • Dedicated for paper & board applications with water based inks and for all absorbent and non-absorbent commonly used substrates with solvent based inks
  • Conditionally suitable for UV inks

Benefits

Plate Charecteristics

  • Sustainable medium hard photopolymer flexo plate for the perfect combination of halftones & solids
  • Suitable for tube & LED exposure
  • Dedicated for paper & board applications with water based inks and for all absorbent and non-absorbent commonly used substrates with solvent based inks
  • Conditionally suitable for UV inks

Sustainability

  • Contains 24 – 29% renewable raw material1
  • Proven, consistent quality in a more sustainable way
  • Energy saving due to 20% faster plate processing
  • Consistent and reliable plate processing (waste reduction)

Improved Productivity

  • Overall 20% faster plate processing possible when using nyloflex® eco plates (in direct comparison to standard nyloflex® ACT)

Suitable equipment

The nyloflex® eco ACT Digital can be processed with nyloflex® processing equipment and all similar devices. The nyloflex® eco ACT Digital can be used with all laser systems suitable for imaging flexo printing plates.

Printing inks

Suitable for all water based and solvent based printing inks and conditionally suitable for UV inks4. (ethyl acetate content preferably below 15%, ketone content preferably below 5%)

Washout solvents

Especially good results are achieved with nylosolv® washout solvents. nylosolv® can be distilled and reused.

Processing information

A detailed description of the imaging, exposure and finishing steps, as well as detailed information about handling and storing, can be found in the nyloflex® User Guide.

High quality standard

XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).

Get in touch

Is this what you were looking for? Hit the button below to request a quotation.

Request Quote

Specifications

The main specifications of the nyloflex® eco ACT 170 D

  • Base materialPolyester film
  • Color of raw platelight blue with black LAMS layer
  • Total thickness (mm) (inch)1.70 (0.067")
  • Hardness acc. to DIN 5350550
  • Plate hardness (Shore A)63
  • Recommended relief depth (mm)0.7 – 0.9
  • Tonal range (%)1 – 98
  • At screen ruling (l/cm)60
  • Fine line width (down to μm)80
  • Isolated dot diameter (down to μm)160
  • Back exposure (s)25 – 50
  • Main exposure (min)8 – 12
  • Washout speed (mm/min)200 – 250
  • Drying time at 60°C / 140°F (h)1.5 - 2.0
  • Post exposure UV-A (min)8
  • Light finishing UV-C (min)6 – 8
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.
chatsimple