nyloflex® eco FAC 284 D
Lifting proven quality to a sustainable future
Main specifications
- Base materialPolyester film
- Color of raw plateLight blue with black LAMS layer
- Total thickness (mm) (inch)2.84 (0.112")
- Hardness acc. to DIN 5350532
- Plate hardness (Shore A)39
Main specifications
- Base materialPolyester film
- Color of raw plateLight blue with black LAMS layer
- Total thickness (mm) (inch)2.84 (0.112")
- Hardness acc. to DIN 5350532
- Plate hardness (Shore A)39
nyloflex® eco FAC 284 D Overview
- Sustainable soft photopolymer flexo plate
- Dedicated for high performance corrugated post print
- Copes with all requirements – starting from print on roughand uneven substrates to pressure sensitive and soft paper substrates
- Extremely robust and durable
- Suitable for bank- & LED exposure
Benefits
Plate Charecteristics
- Sustainable soft photopolymer flexo plate
- Dedicated for high performance corrugated post print Copes with all requirements – starting from print on roughand uneven substrates to pressure sensitive and soft paper substrates
- Extremely robust and durable
- Suitable for bank- & LED exposure
Sustainability
- Contains 19 – 20% renewable raw material
- Proven, consistent quality in a more sustainable way
- Energy saving due to 20% faster plate processing
- Consistent and reliable plate processing (waste reduction)
Improved Productivity
- Overall 20% faster plate processing possible when using nyloflex® eco plates (in direct comparison to standard nyloflex® FAC)
Suitable equipment
The nyloflex® eco FAC can be processed with nyloflex® processing equipment and all similar devices. The nyloflex® eco FAC Digital can be used with all laser systems suitable for imaging flexo printing plates.
Printing inks
Suitable for all water based and solvent based printing inks (ethyl acetate content preferably below 15%, ketone content preferably below 5%).
Washout solvents
Especially good results are achieved with nylosolv® washout solvents. nylosolv® can be distilled and reused.
Processing information
A detailed description of the individual platemaking steps, as well as detailed information about processing and storing can be found in the nyloflex® User Guide.
High quality standard
XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).
Get in touch
Is this what you were looking for? Hit the button below to request a quotation.
Request QuoteSpecifications
The main specifications of the nyloflex® eco FAC 284 D
- Base materialPolyester film
- Color of raw plateLight blue with black LAMS layer
- Total thickness (mm) (inch)2.84 (0.112")
- Hardness acc. to DIN 5350532
- Plate hardness (Shore A)39
- Recommended relief depth (mm)0.9 - 1.2
- Tonal range (%)3 - 95
- At screen ruling (l/cm)40
- Fine line width (down to μm)100
- Isolated dot diameter (down to μm) 150
- Back exposure (s)20 - 40
- Main exposure (min)10 - 15
- Washout speed (mm/min)150 - 170
- Drying time at 60°C / 140°F (h)2.0 - 3.0
- Post exposure UV-A (min)8
- Light finishing UV-C (min)5 - 8
Product Brochure EN