rotec® H/C Adapter
Compressible adapters to mount In-The-Round sleeves
Main specifications
- Field of ApplicationMid-web/ Wide-web/ Pre-Print
- Wall thickness (Bridge)0.21 inches - 0.41 inches (5 mm - 10 mm)
- Wall thickness (Unifit)0.50 inches - 3.0 inches (13 mm - 75 mm)
- Wall thickness (Airo)0.70 inches - 5.0 inches (18 mm - 125 mm)
- Outer diameter tolerance+/- 0.001 inches (+/- 0.025 mm)
Main specifications
- Field of ApplicationMid-web/ Wide-web/ Pre-Print
- Wall thickness (Bridge)0.21 inches - 0.41 inches (5 mm - 10 mm)
- Wall thickness (Unifit)0.50 inches - 3.0 inches (13 mm - 75 mm)
- Wall thickness (Airo)0.70 inches - 5.0 inches (18 mm - 125 mm)
- Outer diameter tolerance+/- 0.001 inches (+/- 0.025 mm)
rotec® H/C Adapter Overview
- These products are ideal for high-speed applications, because the construction and materials of these adapters provide bounce reduction properties.
- These products provide superior dimensional stability, because the adapter construction includes an additional glassfiber barrier layer to prevent any growth.
- Available with rotec® Ω Technology that provides complete conductivity from the base sleeve through to the surface.
Benefits
- Exclusive compressible anti-slip surface
- Consistent printing performance, especially for long print runs, due to bounce-back properties of the compressible surface
- Available as Bridge (flow-through), Unifit (flow-through) or Airo (direct air connection) versions for customized air transfer system
Air source
How the air flows into the adapter
Bridge:
For wall thicknesses below 10 mm. Conducts air from the air cylinder to the surface via air holes.
Unifit:
Customised air transfer system for most types of air cylinders. In the Eco Bridge version, the air holes are replaced by a breathable metal ring on the operator side.
Airo:
Dedicated external air connection system. In the Eco Bridge version, the air holes are replaced by a breathable metal ring on the operator side.
Air Distribution
How the air flows out of the adapter, in order to mount the sleeve
Standard Air Holes
4-8 air holes on operator side, additional holes along the length of the adapter
Get in touch
Is this what you were looking for? Hit the button below to request a quotation.
Request QuoteSpecifications
The main specifications of the rotec® H/C Adapter
- Field of ApplicationMid-web/ Wide-web/ Pre-Print
- Wall thickness (Bridge)0.21 inches - 0.41 inches (5 mm - 10 mm)
- Wall thickness (Unifit)0.50 inches - 3.0 inches (13 mm - 75 mm)
- Wall thickness (Airo)0.70 inches - 5.0 inches (18 mm - 125 mm)
- Outer diameter tolerance+/- 0.001 inches (+/- 0.025 mm)
- Total indicated run-out (TIR) tolerance+/- 0.001 inches (+/- 0.025 mm) (measured on carrier cylinder at TIR ≤ 0.005 mm)
- Length tolerance+/-2 mm
Overview Brochure US