nyloprint® WKF 40
The nyloprint® WKF40 and WKF40 D is a correction foil based plate for date codes in tubes, cups and can printing.
Main specifications
- Base Materialfoil
- Colour of raw platered
- Total thickness (mm) (inch)0.43 (0.017”)
- Relief depth (mm) (inch)0.27 (0.0106”)
- Tonal range (%)1 – 98%
Main specifications
- Base Materialfoil
- Colour of raw platered
- Total thickness (mm) (inch)0.43 (0.017”)
- Relief depth (mm) (inch)0.27 (0.0106”)
- Tonal range (%)1 – 98%
nyloprint® WKF 40 Overview
Benefits
The nyloprint® WKF40 and WKF40 D correction foil plate is a water washable plate with a thin
polyester base. The digital version has a laser ablative mask layer (LAMS). The plate formulation is
equivalent to the nyloprint® WF-H or WF-HD, but it is thinner and has a lower relief depth to meet the
requirements for small correction or replacements.
The nyloprint® WKF 40/D is used in order to make small changes within existing processed steel based
nyloprint® plates, such as small letters, numbers, logos or especially date codes.
Get in touch
Is this what you were looking for? Hit the button below to request a quotation.
Request QuoteSpecifications
The main specifications of the nyloprint® WKF 40
- Base Materialfoil
- Colour of raw platered
- Total thickness (mm) (inch)0.43 (0.017”)
- Relief depth (mm) (inch)0.27 (0.0106”)
- Tonal range (%)1 – 98%
- Fine line width (down to μm)<100
- Isolated dot diameter (down to μm)<200
- Laser energy (J/cm2 ) approx.~ 2.8
- Main exposure (min)2
- Washout time1-2
- Washout temperature28°C / 82.4° F
- Drying time at 60°C / 140°F (min)10
- Post exposure (min)2
Product Brochure EN