nyloprint® WA 240
nyloprint® plate for embossing and hot moulding, Also for hot foil stamping
Main specifications
- Base Materialaluminium
- Color of raw platered
- Total thickness (mm) (inch)2.4 (0.94")
- Plate hardness (Shore D)79
- Relief depth (mm)(inch)1.4 (0.055")
Main specifications
- Base Materialaluminium
- Color of raw platered
- Total thickness (mm) (inch)2.4 (0.94")
- Plate hardness (Shore D)79
- Relief depth (mm)(inch)1.4 (0.055")
nyloprint® WA 240 Overview
Benefits
Thanks to the heat resistance properties (up to 130 °C / 266 °F) of nyloprint® WA210 and WA240 metal based plates, they are ideally suited for hot moulding to produce rubber clichés.
Suitable equipment
The nyloprint® WA plates can be processed with nyloprint® processing equipment and all similar devices. The nyloprint® WA can be used with all IR-laser systems suitable for imaging letterpress plates. For washout the use of brushes in the washer is recommended.
Washout medium
For washout only pure tap water is needed.
Processing information
A detailed description of the individual platemaking steps, as well as detailed information about processing and storing can be found in the nyloprint® User Guide.
High quality standard
XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).
Get in touch
Is this what you were looking for? Hit the button below to request a quotation.
Request QuoteSpecifications
The main specifications of the nyloprint® WA 240
- Base Materialaluminium
- Color of raw platered
- Total thickness (mm) (inch)2.4 (0.94")
- Plate hardness (Shore D)79
- Relief depth (mm)(inch)1.4 (0.055")
- Tonal range (%)2–95
- at screen ruling of60 l/cm
- Fine line width (down to μm) 100 lpi
- Isolated dot diameter (down to μm)200
- Washout time at 45°C / 113°F (min)7
- Drying time at 80°C / 176°F (min)60
Overview Brochure EN