nyloflex® XTP 170 D
The thermal standard for high quality flexo printing with water based and UV inks
Main specifications
- Color of raw platelight blue
- Total thickness (mm)1.70
- Hardness acc. to DIN 5350559
- Plate hardness (Shore A)69
- Recommended relief depth (mm)0.6
Main specifications
- Color of raw platelight blue
- Total thickness (mm)1.70
- Hardness acc. to DIN 5350559
- Plate hardness (Shore A)69
- Recommended relief depth (mm)0.6
nyloflex® XTP 170 D Overview
Benefits
- Best properties for a flexo plate in the Tag & Label in one plate for all inks to combine jobs efficiently with minimum plate waste
- Excellent ink transfer and better impression latitude out of the box due to inherent flat top dots
- Reduced downtime due to Anti-Ink-Filling (AIF) properties keeping plate clean for longer runs
- Quick to color minimizing start-up time and waste
- Compatible with the same screening and pre-press technologies used for solvent plates
- A standard UV tube exposure system is sufficient, no need to invest into newer technology
- Low highlight dot gain for consistent print quality over longer print runs
Suitable equipment
nyloflex® XTP Digital plates may be exposed using any nyloflex® exposure system and all similar devices and can be used with all laser systems suitable for imaging flexo printing plates. nyloflex® XTP Digital plates must be processed with the nyloflex® Xpress Thermal Processor
Processing information
A detailed description of the imaging, exposure and finishing steps, as well as detailed information about handling and storing, can be found in the nyloflex® User Guide.
High quality standard
XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).
Get in touch
Is this what you were looking for? Hit the button below to request a quotation.
Request QuoteSpecifications
The main specifications of the nyloflex® XTP 170 D
- Color of raw platelight blue
- Total thickness (mm)1.70
- Hardness acc. to DIN 5350559
- Plate hardness (Shore A)69
- Recommended relief depth (mm)0.6
- Tonal range (%)2-98
- at screen ruling of (l/cm)54
- Fine line width (down to μm)40-80
- Isolated dot diameter (down to μm)200
- Back exposure (s)20–40
- Main exposure (min)8
- Post exposure UV-A (min)8
- Light finishing UV-C (min)4-6
- UVA bulb output (mW/cm²)≥17
Product Brochure EN