nyloflex® XPM 114 D
The thermal plate for simple designs on rougher substrates combining solids and screens
Main specifications
- Color of raw platelight blue
- Total thickness (mm)1.14
- Hardness acc. to DIN 5350550
- Plate hardness (Shore A)72
- Recommended relief depth (mm)0.46–0.56
Main specifications
- Color of raw platelight blue
- Total thickness (mm)1.14
- Hardness acc. to DIN 5350550
- Plate hardness (Shore A)72
- Recommended relief depth (mm)0.46–0.56
nyloflex® XPM 114 D Overview
The soft alternative
Benefits
- Soft thermal round top dot plate very well suited for uncoated paper with water based and UV inks
- With hybrid screening and LED exposure further improved print quality
- Requires a longer exposure time when LED exposed depending on exposure device
- Good out of the box ink laydown resulting in better solids including linework
- Well suited for small plate cylinder circumferences due to higher plate flexibility
Suitable equipment
nyloflex® XPM Digital plates may be exposed using any nyloflex® exposure system and all similar de-vices and can be used with all laser systems suitable for imaging flexo printing plates. nyloflex® XPM Digital plates must be processed with the nyloflex® Xpress Thermal Processor.
Printing inks
Suitable for all UV inks and water based printing inks.
Processing information
A detailed description of the imaging, exposure and finishing steps, as well as detailed information about handling and storing, can be found in the nyloflex® User Guide.
High quality standard
XSYS printing plates are produced at Willstätt production site, which is certified according to international standards for quality management (DIN EN ISO 9001:2015), environmental management (DIN EN ISO14001:2015) and energy management (DIN EN ISO 50001:2018).
Get in touch
Is this what you were looking for? Hit the button below to request a quotation.
Request QuoteSpecifications
The main specifications of the nyloflex® XPM 114 D
- Color of raw platelight blue
- Total thickness (mm)1.14
- Hardness acc. to DIN 5350550
- Plate hardness (Shore A)72
- Recommended relief depth (mm)0.46–0.56
- Tonal range (%)1–99
- at screen ruling of (l/cm)80
- Fine line width (down to μm)100
- Isolated dot diameter (down to μm)200
- Back exposure (s)12–20
- Main exposure (min)6–8
- Post exposure UV-A (min)10
- Light finishing UV-C (min)8–12
Product Brochure EN