Web Shop

nyloflex® ITR Thin Sleeve

In-The-Round: Endless ready-to-image photopolymer sleeves with LAMS layer for digital artwork

Main specifications

  • ApplicationHigh quality printing + increased stability due to 0.45 mm base sleeve
  • Thin Variable: For printing variable repeat sizes with adapted photopolymer thickness
  • Wall thickness (1)Thin: 1.57 mm 1.57 mm
  • Thin Variable: 1.33 – 3.33 mm
  • Repeat rangeThin: 290 - 910 mm
All specifications

Main specifications

  • ApplicationHigh quality printing + increased stability due to 0.45 mm base sleeve
  • Thin Variable: For printing variable repeat sizes with adapted photopolymer thickness
  • Wall thickness (1)Thin: 1.57 mm 1.57 mm
  • Thin Variable: 1.33 – 3.33 mm
  • Repeat rangeThin: 290 - 910 mm
All specifications

nyloflex® ITR Thin Sleeve Overview

ITR
  • In-The-Round: Endless ready-to-image photopolymer sleeves with LAMS layer for digital artwork

Benefits

  • Combines advantages of XSYS dedicated photopolymer plate technology with vast experience in production of sleeves
  • Perfect for endless designs and seamless printing
  • Several available wall thicknesses to match required job specifications

Footnotes:

(1) US sizes for ¼“ and 1/8“
(2) Modified base sleeve wall thickness for repeat ranges above 760 mm for nyloflex ITR Classic.
(3) Additional lengths available on request.
(4) Suitability with UV inks is dependant on the ink type and temperature – these factors could affect the performance of the plate and consistency of the print.

Get in touch

Is this what you were looking for? Hit the button below to request a quotation.

Request Quote

Specifications

The main specifications of the nyloflex® ITR Thin Sleeve

  • ApplicationHigh quality printing + increased stability due to 0.45 mm base sleeve
  • Thin Variable: For printing variable repeat sizes with adapted photopolymer thickness
  • Wall thickness (1)Thin: 1.57 mm 1.57 mm
  • Thin Variable: 1.33 – 3.33 mm
  • Repeat rangeThin: 290 - 910 mm
  • Thin Variable: 288.72 – 920.5 mm
  • Length (3)280 mm - 1700 mm
  • Relief depthStandard: 0.7 mm
  • Also available from 0.5 mm - 2 mm
  • Tonal range (%)1% - 98% at screen ruling of 60 liter/cm (150lpi)
  • Suitable adaptersrotec® H/C Adapter
  • Suitable equipmentnyloflex® ITR Thin and nyloflex® ITR Classic can be processed with the nyloflex® ITR Exposure and nyloflex® ITR Processor and all commonly used devices.
  • Printing Inks (4)nyloflex® ITR Thin and nyloflex® ITR Classic are suitable for all water based and alcohol based printing inks and conditionally suitable for UV inks. (ethyl acetate content preferably below 15%, ketone content preferably below 5%)
  • Washout solventsEspecially good results are achieved with nylosolv® washout solvents. nylosolv® can be distilled and reused

Downloads

Please select a language:

* Some documents may not be available for other languages
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.
chatsimple