nyloflex® ITR Thin Sleeve
In-The-Round: Endless ready-to-image photopolymer sleeves with LAMS layer for digital artwork
Main specifications
- ApplicationHigh quality printing + increased stability due to 0.45 mm base sleeve
- Thin Variable: For printing variable repeat sizes with adapted photopolymer thickness
- Wall thickness (1)Thin: 0.087 inches
- Thin Variable: 0.052 – 0.131 inches
- Repeat rangeThin: 11.50 - 35.75 inches
Main specifications
- ApplicationHigh quality printing + increased stability due to 0.45 mm base sleeve
- Thin Variable: For printing variable repeat sizes with adapted photopolymer thickness
- Wall thickness (1)Thin: 0.087 inches
- Thin Variable: 0.052 – 0.131 inches
- Repeat rangeThin: 11.50 - 35.75 inches
nyloflex® ITR Thin Sleeve Overview
ITR
- In-The-Round: Endless ready-to-image photopolymer sleeves with LAMS layer for digital artwork
Benefits
- Combines advantages of XSYS dedicated photopolymer plate technology with vast experience in production of sleeves
- Perfect for endless designs and seamless printing
- Several available wall thicknesses to match required job specifications
Footnotes:
(1) US sizes for ¼“ and 1/8“
(2) Modified base sleeve wall thickness for repeat ranges above 760 mm for nyloflex® ITR Classic.
(3) Additional lengths available on request.
(4) Suitability with UV inks is dependant on the ink type and temperature – these factors could affect the performance of the plate and consistency of the print.
Get in touch
Is this what you were looking for? Hit the button below to request a quotation.
Request QuoteSpecifications
The main specifications of the nyloflex® ITR Thin Sleeve
- ApplicationHigh quality printing + increased stability due to 0.45 mm base sleeve
- Thin Variable: For printing variable repeat sizes with adapted photopolymer thickness
- Wall thickness (1)Thin: 0.087 inches
- Thin Variable: 0.052 – 0.131 inches
- Repeat rangeThin: 11.50 - 35.75 inches
- Thin Variable: 11.37 – 36.24 inches
- Length (3)11.0 - 66.9 inches
- Relief depth0.028 inches
- Also available from 0.020 - 0.079 inches
- Tonal range (%)1% - 98% at screen ruling of 60 liter/cm (150lpi)
- Suitable adaptersrotec® H/C Adapter
- Suitable equipmentnyloflex® ITR Thin and nyloflex® ITR Classic can be processed with the nyloflex® ITR Exposure and nyloflex® ITR Processor and all commonly used devices.
- Printing Inks (4)nyloflex® ITR Thin and nyloflex® ITR Classic are suitable for all water based and alcohol based printing inks and conditionally suitable for UV inks. (ethyl acetate content preferably below 15%, ketone content preferably below 5%)
- Washout solventsEspecially good results are achieved with nylosolv® washout solvents. nylosolv® can be distilled and reused
Product Brochure US